Quincke Tube

Psychology

Accession Number: 2012.psy.94

Instrument Name: Quincke Tube

Description:

Several long, intricately connected, thin, metal pipes are arranged horizontally and attached to a flat wooden base. The central section of the piping has an adjustable piece that can slide along the other pipes in a trombone-like manner. This sliding section has a piece of wood in the centre with an arrow attached to it that points to positions along an adjacent centimeter ruler (1-20 cm), which is attached along one edge of the outer piping. The ruler is subdivided into mm. Some rubber is connected to parts of the metal tubing at the end of the tube.

Alternative Name: Acoustic Interferometer

Primary Materials: Wood, Metal, Rubber

Markings:

Old Inventory Number = PSY 18. Number “1″ is written in white paint on the bottom right corner.

Dimensions (cm):

Base: Height = 7, Width = 55, Length = 17.5; Instrument: Height = 4, Width = 46, Length = 17

Function:

This instrument is used to perform experiments in auditory localization. A sound source (tuning fork) would be placed at the entrance of the single input tube. The sound travels through the two tubes, of adjustable length, toward the two outputs. The middle unit can slide back and forth in order to adjust the phase conditions and create harmonics.

Condition:

Instrument is in good condition with a few minor scratches and abrasions.

Associated Instruments: 2012.psy.76, 77, 78, 79, 113

Manufacturer:

Date of Manufacture: c. 1910

Provenance:

Department of Psychology, University of Toronto.

Donated to UTSIC: No

Historical Notes:

The psychology department owns several versions of this instrument, each numbered for classroom use.

The original instrument appeared in the British Journal of Psychology in 1908.

1) Richter, J. C. (1910). Review of the influence of binaural differences on the localization of sounds. Psychological Bulletin, 7(3), 101-103. Describes a similar instrument.